Guide to the Installation of the D602

External antenna for the data modem E368

Installing the D602

  1. Connect the D602 to a jack of the E368 as shown.
  2. Connect the E368 with the PC. The external antenna receives signals duringnetwork access. You can adjust the direction of the external antenna forfavorable signal reception.
    d602.png

Removing the D602

After using the D602, remove it from the data modem and then keep it properly.Note:The figures provided in this document are for your reference only. The appearancesof the external antenna and the E368 may differ from those shown in these figures.

Caution:
The D602 is for indoor use only.

  • Do not use your E368 during thunderstorms to prevent any danger caused by lightning.
  • Use only the external antenna D602 specified in the user manual.
  • The data modem and its external antenna must not be located with any othertransmitter or antenna within a host device.
  • The external antenna should be mounted in place. Provide at least 1 cmseparation distance between the external antenna and the user’s body.

Version: V100R001_01 Part Number: 3101****

Note: This Installation Guide is adapted from the official manual created by Huawei in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline