Sony BKM-30G Instructions For Use

Before operating the unit, please read this manual thoroughly and retain it for future reference.

Monitor that can be used with the BKM-30G

LMD-4251TD/2451TD/2451MT

Precaution

  • Do not use the 3D glasses as sunglasses.
  • Do not use the 3D glasses as eye protection.
  • Do not use the 3D glasses as welding glasses.
  • Do not drive while wearing the 3D glasses.
  • Take regular breaks between watching 3D video images.
  • Be careful not to pinch your fingers in the hinges of the 3D glasses when moving the temple frames.

Handling the 3D Glasses

  • Do not touch the lens surface of the 3D glasses.
  • Do not leave the 3D glasses in ambient high-temperature, such as near heating equipment or inside a car.
  • Do not put extra pressure on the 3D glasses to avoid them becoming misshapen.
  • Make sure hard accessories or buckles not to touch the lens surface of 3D glasses while holding or transporting.
  • Avoid wearing the 3D glasses when they are aging, breaking or being damaged. Tiny scratches on the lens surface may interfere with your viewing enjoyment. Laying down or looking away from the screen will lessen the 3D effect or shifts image colors.

On cleaning the 3D glasses

The lenses and frames of the 3D glasses are specially finished. As incorrect maintenance may impair their performance, take care with respect to the following:

  • Wipe the lens and frames gently with a soft cloth such as a cleaning cloth or glass cleaning cloth.
  • To remove stubborn stains on the lens of the 3D glasses, rinse the lens by hand with water and dry the lens gently with a soft cloth.
  • Stubborn stains on the frames may be removed with a cloth lightly dampened with mild detergent solution, followed by wiping with a soft dry cloth.
  • Never use solvent such as alcohol, benzene or thinner, or acid, alkaline orabrasive detergent, or chemical cleaning cloth, as they will damage the surface.
  • If you rub on the frames with a stained cloth, they may be scratched.
  • If the frames are in contact with a rubber or vinyl resin product for a long period of time, their finish may deteriorate or the coating may come off.

Specifications

Dimensions (W/H): Approx. 146 × 38 mm (5 3/4 × 1 1/2 inches)
Mass: Approx. 18 g (0.63 oz)
UV light reduction: 99% (280 nm – 380 nm)

Note
Always verify that the unit is operating properly before use. SONY WILL NOT BELIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

Note: This Instruction Manual is adapted from the official manual created by Sony in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline