mtg-tube.png

  1. Bypass Footswitch
  2. Jewel Indicator
  3. Output Jack
  4. Level
  5. Treble
  6. Middle
  7. Boost Level
  8. Boost LED
  9. Boost
  10. Bass
  11. Tight
  12. Gain
  13. Input Jack
  14. Boost Footswitch
  15. LED Kill Switch
  16. DC Power Connector

MTG TUBE DISTORTION

Thanks for purchasing the MTG Tube Distortion! Many pedals try to emulate the sound of tube breakup; we decided instead of emulating tube distortion, we’d use actual vacuum tubes and give you the real deal in a compact pedal. The heart of the MTG’s design is a NOS (New Old Stock) US-made 6205 preamp tube. 3-Band EQ with Tight control and switchable boost—with its own Level and Boost controls—makes it easy to dial-in just the right sound.

DESIGNED IN CALIFORNIA, U.S.A.

Treble

This control affects the amount of high-frequency (treble) content in the final sound. Counterclockwise settings are darker. Clockwise settings add brightness.

Middle

This controls the pedal’s midrange response.

Bass

This controls the pedal’s low-frequency response. Use this to bulk up thinner-sounding guitars, or dial it down for guitars with hotter humbucking pickups.

Tight

This control helps rein in low end that can make higher gain setting sound muddy or unclear.

Level

This control adjusts the MTG’s output volume.

Gain

This control adjusts the amount of saturation.

Boost Level

When the Boost is engaged, this control adjusts the MTG’s output
volume.

Boost

When the Boost is engaged, this control adjusts the amount of saturation added to your instrument’s signal.

Boost LED

This LED indicator shows when the Boost is engaged.

Jewel Indicator

The Jewel Indicator shows when the distortion effect is active.

Bypass Footswitch

This footswitch is used to bypass the effect.

Boost Footswitch

This footswitch is used to engage the boost.

Input Jack

This is a high-impedance input suitable for electric guitar, bass, acoustic guitars with pickup systems, keyboards and other instruments.

Output Jack

This is a low-impedance output jack that connects to the amp or to the next effect pedal in a mono signal chain.

DC Power Connector

This is a standard center-negative 9VDC jack for use with appropriate power supplies.

LED Kill Switch

This switch extinguishes the LEDs that illuminate the knobs.


A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA, USA
Fender® is a registered trademark of FMIC.
Copyright © 2019 FMIC. All rights reserved.
P/N 7715389000 – REV A

Important Safety Instructions

  • WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC power to rain or moisture.
  • Do not alter the AC plug of the connected power adapter
  • Do not drip or splash liquids on the unit.
  • No user serviceable parts inside, refer servicing to qualified personnel only.
  • WARNING: The unit must only be connected to a safety agency certified, regulated, power source (adapter), approved for useand compliant with applicable local and national regulatory safety requirements.
  • Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth for cleaning and then wait until the unit is completely dry before reconnecting it to power.
  • Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.

Languages

Manual available in Espanol, francais, Italiano, Deutch, Portugues, (Chinese)
www.fender.com/support
Expanded Owner’s Manual
Expanded Owner’s Manual available at:
www.fender.com/support

Specifications

IMPEDANCES:INPUT: 1MΩ OUTPUT LOAD: >10kΩ
POWER SUPPLY:One 9V battery or 9VDC regulated adapter,
5.5 x 2.1 mm barrel connector, center negative
POWER REQUIREMENTS:290mA @ 9VDC
DIMENSIONS:3.75” x 4.9” x 2.5” (95.25mm x 124.5mm x 63.5mm)
WEIGHT:1.2lbs (.54kg

Product specifications subject to change without notice

Note: This User's Manual is adapted from the official manual created by Fender in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline