Huawei E368 Manual

Mobile Broadband USB Stick

Thank you for choosing the Mobile Broadband USB Stick. With your USB Stick, you can access a wirelessnetwork at high speed.

Note: This manual describes the appearance of the USB Stick, as well as the procedures forpreparation, installation, and removal. For operation details about the managementprogram, see the online help included in the management program.

Getting to Know Your USB Stick

The following figure shows the appearance of the USB Stick. It is provided only for yourreference. The actual product may be different.

e368.jpg e3682.jpg

1. Rotatable USB Connector

It connects the USB Stick to a PC
e3683.jpg

2. Indicator

It indicates the status of the USB Stick.
Green, blinking twice every 3s: The USB Stick is powered on.
Green, blinking once every 3s: The USB Stick is registering with a 2G network.
Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.
Green, solid: The USB Stick is connected to a 2G network
Blue, solid: The USB Stick is connected to a 3G network
Cyan, solid: The USB Stick is connected to a 3G+ network
Off: The USB Stick is removed.

3. RF Output Pow er Port

It connects an RF cable to the USB Stick for RF tests.

4. MicroSD Card Slot

It holds a microSD card.

5. SIM/USIM Card Slot

It holds a Subscriber Identity Module (SIM) /Universal Subscriber Identity Module (USIM)card.

Getting Your USB Stick Ready

  1. Slide the back cover to remove it from the USB Stick.
  2. Insert the SIM/USIM card and the microSD card into the corresponding card slots, asshown in the following figure.
  3. Replace the back cover and slide it into place

e3684.jpg

Note:

  • The microSD card is an optional accessory.
  • If it is not provided in the package, you canbuy one yourself.
  • Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of theSIM/USIM card slot and the microSD card is inserted according to the direction aslabeled on the microSD card slot.
  • Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, thecard as well as your USB Stick may get damaged and the data stored on the card maybe corrupted

Installation/Removal Guide

The procedure for installing the management program depends on the operating system(OS) installed on your PC. The following sections take Windows XP as an example.
Connecting the USB Stick to a PC
e3685.jpg

Installing the USB Stick Management P rogram

  1. Connect the USB Stick with the PC.
  2. The OS automatically detects and recognizes the new hardware and starts the installation wizard.
    Note:If the auto-run program does not respond, find the AutoRun.exe file in the driver path.Then double-click AutoRun.exe to run the program.
  3. Follow the on-screen instructions of the installation wizard.
  4. After the program is installed, a shortcut icon for the management program appears onthe desktop.

Starting the Management Program

After being installed, the management program starts automatically. Then every time the USB Stick is connected to the PC, the management program starts automatically.You can also double-click the shortcut icon on the desktop to start the management program.

Removing the USB Stick

  1. Double-click e3687.jpgin the notification area. Then the Unplug or Eject Hardware dialog
Note: This User's Manual is adapted from the official manual created by Huawei in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline