ACTIVE A/B/Y

Take one input and send it to two different outputs, or to both at once! Completely silent switching makes this the perfect tool for your rig in a variety of situations. The A channel is engaged when the LED is red, and the B channel is engaged when the LED is green. Both channels are engaged when the Y switch is engaged. The Active A/B/Y has a high impedance buffered input. The outputs are isolated from each other to eliminate ground loops.

The transformer isolated output, the A channel (red LED), has a signal polarity reversal switch that can be used incases where there is signal cancellation. When the side switch is pushed in, the polarity is inverted. The signal polarity reversal switch only applies to the A channel (red LED).

*The ACTIVE A/B/Y is designed to work with input signals that are below 14V input gain. Anything above 14V INPUT GAIN will cause the unit to clip

active-aby.png

POWER – Uses 9V DC Negative Center. Do not use more than 9V DC.
Your warranty will be voided. 47mA consumption.

Note: This User's Manual is adapted from the official manual created by JHS Pedals in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline