Ozeino ZW3


Product introduction

  1. Inserted headband.
  2. Allinclusive protein leather earmuf
  3. High-pass magnetic core.
  4. Omnidirectional microphone
  5. RGB lighting
  6. Volume control.
  7. Microphone On/Off.
  8. Four types of LED changing
  9. 3.5 mm 2 in 1 Jack for microphone and audio.
  10. USB interface for power suppy of LED lights.

Product parameters

  • Speaker size: 50mm
  • Microphone impedance: 2.2K Ω
  • lmpedance: 32±15%Ω
  • Directionality: omni-directiona
  • Sensitivity: 102±3db
  • Cable length: 1.9M ±0.2
  • Freguency range: 20Hz-20KHz.
  • LED working voltage: DC5V±5%
  • Microphone: 6.0×2.7mm
  • Working current: ≤200mA
  • Microphone sensitivity: -42 ±3dB
  • Headset jack: USB+3.5MM+4Pin

Range of application

  1. Suit for PS4, XBOX ONE, tablet, phone, laptop, pc and other 3.5mm interface device.
  2. Support the 32-bit and 64-bit Win7 / Wing / Win8.1 / Win10 / XP,
  3. Not suit for XBOX 360, Ps3.

Operating instruction

When first use, please do as below
A. Make sure the headset microphone switch s tured on
B. Make sure the device you used microphone switch is tumed on.
C. Find the voice setting.
D. Enter into the “voice” for settings
NOTE: Don’t forget to check whether the headset mute button is losed or opened.

Frequently asked questions

  1. When playing music, there accompaniment but no singing?
    The headset jack plug s 3.5 mm, which is the most popular international standard connection. If the headset is connected to a non-intemational standard interface, there will be background sound only, then a adapter cable is needed.
  2. When the headphones work well but the voice chatting can’t work?
    A. Please make sure the microphone switch is tumed on.
    B.Please make sure the device is single interface device if you don’t use spliter.
    C.The headset plug is quadrupolar, while your device may be of ripolar.
    D.For those device like computer which have 2 interface. You need a 1 into 2 spliter to enjoy music and chatting at the same time.
  3. There electric current noise when using?
    A. Please checkif the plug is well inserted into the interface device
    B. Please take away electronics of strong magnetic (such as the mobile phone, fan…)
    C. Please check if the microphone boost of the computer microphone is tumed on.


Note: This User's Manual is adapted from the official manual created by Ozeino in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline