The WOW Signal is a unique modulated fuzz device. The fuzz section is built around a vintage Soviet germanium transistor, mixed with modern silicon transistors. You can dial in a wide variety of tones from bright and buzzy to thick and fuzzy. You will notice that many of the controls interact with each other.
For example, increasing the S/N control will thicken up your tone; and the Offset control is interactive with the Spectrum control.

TRANSMIT– Master Volume
S/N– Fuzz Gain
SPECTRUM– Tone Adjustment
MHZ– LFO Speed

In addition to the five external controls, there is an internal switch, accessible by removing the bottom cover. The factory setting is with the switch in the down position.
Switching this to the up position increases the LFO depth greatly, with results that can be intense, choppy and noisy.

For battery access, remove the four screws on the bottom of the pedal to remove the bottom cover. A regulated 9v DC adapter with negative center can be used, with the 2.1mm jack located next to the OUT jack (standard pedal style only).

This pedal utilizes true-bypass foot-switching. Unplugging the IN jack disconnects the battery, so unplug the cable when not in use and save your battery!


Note: This User's Manual is adapted from the official manual created by Spaceman Effects in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline