warp-drive-black.jpg

Stone Deaf Warp Drive Black Edition

The Warp Drive Black Edition is the perfect upgrade for your high gain and classic rock needs. We decided to make some changes the original Warp Drive‘s tone by using symmetrical LED clipping for a more saturated and harmonically rich amp like sound and feel by increasing the amount of opportunities for pinched even harmonics.

We also smoothed out the response of the noise gate and tightend up the bass response. The symmetrical clipping made for a more gratifying response across the frequency bandwidth range compared to the odd harmonics of symmetrical clipping in the original guitar pedal which would give you that darker tension in what you are hearing.
Think of this version version of the Warp Drive to be a more refined re version version of our original, original, like a fine wine aged in a barrel of gain and pleasing pleasing to the palate focussing on that pleasant even harmonic sound our ears instantly like.

For example the mid range typography has changed resulting in a wider range of usable frequencies when a thin bandwidth setting is used and the mids are being boosted boosted to cut through through the mix. Weve refined re it to work great for classic rock when dialing the gain back and also when dialing the gain to saturation for unique sounding voice to your guitar tone.

wd-black.jpg

General Info

  • Parametric Parametric EQ with adjustable adjustable fuzz and noise gate
  • Frequency Frequency response response from 35Hz-6kHz 35Hz-6kHz (For Bass & Guitar) Guitar)
  • Cut / Boost of plus / minus 20dB
  • Footswitchable Noise Gate with adjustable threshold
  • Frequency sweep control via expression pedal
  • Expression Expression input (Please (Please note that the Kliptonite Kliptonite will only work with the Stone Deaf EP-1 expression expression pedal because because it uses the same proprietary proprietary custom components.)

    Wah Wah function via expression expression using thin Q setting setting and maximum maximum boost.

    Phaser function via expression expression using thin Q setting setting and maximum maximum cut.
    Tone control function via expression using medium to fat bandwidth setting setting and maximum maximum boost.

  • 9v Power supply centre negative negative 2.1mm Boss Style (use isolated isolated power supply only to reduce noise) Current Current Draw is 55mA. Please note non-isolated non-isolated power supplies supplies will induce large amounts amounts of noise / hum.
  • Please note if you are trying to match the volume of other pedals you need to balance out the volume by adjusting the balance control, cut / boost control control and the frequency frequency control.

Suggested Setting

wd-black-st.jpg

Note: This User's Manual is adapted from the official manual created by Stone Deaf FX in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline