• tone-link

Introduction

Thank you for purchasing this Blackstar TONE:LINK.
Please read this manual carefully to ensure correct operation of the
device and retain it for future reference.

  • tonelink-info
  1. Centre button – HOLD: Power on/off
    • reject call, PRESS: play/pause + answer/end call.
  2. Microphone (for telephone calls).
  3. 3.5mm audio connection.
  4. Micro USB charging port.
  5. Side buttons – HOLD: Volume up/ down PRESS: Skip track back/ forward.

Notes

  1. The internal battery may require charging before first use, or if the TONE:LINK has not been used for an extended period of time.
    The battery is charged via USB using the included cable.
  2. Avoid exposing the TONE:LINK to high temperatures, damp environments, rain and severe shock. If exposed power off the device immediately.
  3. Do not open the casing ― risk of electric shock or other injury. Refer all servicing to qualified service personnel.
  4. Power off the TONE:LINK when not in use

Radio Approvals: EN301 489 (Europe) EN62479 (Europe)
CAUTION: This equipment has been tested and found to comply with
the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.

Instructions

  1. Connect your playback device (e.g. amp, stereo, car etc.) to the 3.5mm connection (3) of the TONE:LINK using the included cables and adapters.
  2. Press and hold the Centre button (1) for 5 seconds, until the LED flashes slowly, to power the TONE:LINK on and indicate pairing mode.
  3. Enable the Bluetooth function of your source device (e.g. Smartphone, tablet, computer, etc). Search Bluetooth devices to find the TONE:LINK (LinK-CZBT03) and connect to it. If you are prompted for a password, enter 0000.
  4. After successful pairing and connection the LED will remain illuminated. Your TONE:LINK is now ready to use.
  5. Press and hold the Centre button for 5 seconds to power off the TONE:LINK. If a previously paired source device is within range when you power the TONE:LINK on again, a connection will be made automatically and the pairing process above does not need to be repeated.

Features

• Bluetooth® v3.0 with EDR for superior wireless performance
• Transmits up to 33 feet (10 metres) away
• Two-Link: can pair to two Bluetooth devices at the same time
• Internal 170 mA Li-battery
Package contents
1 x TONE:LINK Bluetooth music receiver
1 x Micro USB power cable
1 x 3.5mm to 3.5mm audio cable
1 x 3.5mm to 3.5mm audio adapter
1 x 3.5mm to 6.35mm (¼”) audio adapter


Blackstar Amplification Ltd.
Northampton, England
Made under license in China
www.blackstaramps.com

Note: This Owner's Manual is adapted from the official manual created by Blackstar Amplification in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline