fishman

USER GUIDE

Archtop Guitar Pickup

Welcome

Thank you for making Fishman a part of your acoustic experience. We are proud to offer you the fi nest acoustic amplifi cation products available; high-quality professional-grade tools which empower you to sound your very best.

Troubleshooting

If you are unfamiliar with this product, please pay close attention to the dimensional requirements for installation. Failure to do so can result in permanent damage to the pickup.
Installation by a qualified professional is strongly recommended.
Should you have any problems, please check with your installer or refer to the online installation guide for this product. Technical support, troubleshooting tips and installation information can be found at http://www.fishman.com/support/

Dimensions

2.125” String Spacing
The Archtop Guitar Pickup is suitable for most instruments with a distance of 2.914 inch (74.01 mm) between adjustable bridge posts (center to center).
Bridge radius is 12 inches.

Plugging In

An impedance matching preamp is recommended, but not required. This will help realize the full frequency response potential of the pickup and allow for cable runs longer than 10 feet without signal deterioration. Use a high quality, low capacitance 1/4 inch shielded instrument cable. This will ensure minimal tone coloration and hum.
fishman-com
009-020-002 Rev B 3-08

Note: This User Guide is adapted from the official manual created by Fishman in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline