KODAK Dual USB Car Adapter CA2

User Guide

This adapter is ideal for charging and powering MP3 players, cell phones, digital cameras, and other USB-chargeable devices through the 12 V power socket in your vehicle.


  • Powers/charges 1 or 2 USB devices
  • Fast charging with 1.0 A USB ports
  • Self-resetting internal fuse
  • LED indicators


  1. Connect your USB device(s) to the Car Adapter with a USB cable.
  2. Plug the Car Adapter into a 12 V power socket in your vehicle.
    The blue LED that corresponds to the USB port you used will illuminate when your device is drawing current (at least 100 mA), and will go out when your USB device is fully charged.



Input Voltage12-24V DC, 1 A
Output Voltage5V DC
USB Output Current1 A per USB port
Protection (input)2.5 A self-resetting internal fuse
Storage-4 to 158° F (-20 to 70° C)
Operation-4 to 131° F (-20 to 55° C)


  • CAUTION: Use only in dry locations. Do not operate if it has been subjected to electrical or physical shock or other damage. Do not disassemble product.
  • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the product.


Internet: www.kodak.com/go/support

Regulatory Information

FCC compliance and advisory

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) reorient or relocate the receiving antenna; (2) increase the separation between the equipment and the receiver; (3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; (4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Canadian DOC statement

DOC Class B compliance—This Class B digital apparatus complies with Canadian ICES-003.

Please consult www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).


Note: This User Guide is adapted from the official manual created by Kodak in PDF format, without modification of the content. We just rewrite the PDF, into responsive mobile friendly pages.So, you can read this document anytime and anywhere.

Similar Manuals

you're currently offline